- 0401 794 305
- sales@propertymaintenanceperthwa.com.au
- 201E Bank St, East Victoria Park, WA 6101
A broken fence is hard to ignore.
It leans. It rattles. A panel comes loose. The gate won’t shut. A post shifts after rain. Wind gets behind an old section and suddenly the whole thing looks ready to go.
Property Maintenance Perth WA handles fence repairs Perth wide for homeowners, landlords, property managers, strata sites and rental properties.
We repair damaged panels, leaning sections, broken or rotted posts, Colorbond sheets, gates, loose rails, storm damage and general fence wear.
Some fences only need a small repair.
Some are past it.
We’ll tell you which one you’re looking at before you spend money patching something that’s not going to hold.
Fence problems usually show up in one spot first.
One panel.
One post.
One gate.
One loose sheet.
One section that moves when the wind gets behind it.
The trick is working out whether that broken bit is the real issue, or just the first part showing the damage.
Common fence repairs we handle include:
Storm-damaged fences
Perth storms tend to find the weak section. A panel blows out, a post shifts, or a tired fence finally starts leaning properly.
Leaning or sagging panels
A sagging panel might be the panel itself, or it might be the post underneath. Replacing the panel without checking the structure can waste money.
Broken or rotted posts
Timber posts often fail at the base where moisture sits. Once the post moves, the panels around it usually start moving too.
Wind-damaged Colorbond sheets
Colorbond can rattle, dent, loosen or pull away when fixings, rails or posts start failing.
Rusted or split rails
Rails do a lot of the holding. If they rust, split or move, the fence can lose shape even if the panels still look alright.
Gate sag and latch issues
A gate that won’t shut usually points to a hinge, latch, post or alignment problem. Sometimes the gate is fine and the fence around it has moved.
Small repair jobs
Loose palings, missing fixings, rattling panels, minor alignment issues and general wear can often be sorted before they become bigger jobs.
The process is simple.
You send through the issue, the address and a few photos if you have them.
Photos help a lot with fence repairs. A clear shot of the full fence line, the damaged section, the posts, the gate or the Colorbond panel usually gives us a better idea of what’s going on.
From there, we work out whether it looks like:
A small repair
A panel or sheet replacement
A post issue
A gate issue
Storm damage
A bigger fence problem
Something outside normal repair scope
If the job can be quoted from the information provided, we’ll guide you from there.
If it needs to be checked on site, we’ll tell you.
If there are timing, access or approval issues, especially for rentals, strata or managed properties, we’ll work through that before the job is booked.
Different fences fail in different ways.
The repair should match the fence, not just cover the obvious damage.
Colorbond fencing is common across Perth.
It’s clean, low-maintenance and handles weather well when it has been installed properly.
But it still wears.
Sheets can dent. Screws can rust. Rails can move. Posts can shift. Gate hardware can fail. A loose section can rattle every time the wind gets up.
Most Colorbond fence problems are local.
A few sheets. One bay. One gate. A panel that’s rattling. A post that’s moved. A top or bottom rail that’s no longer sitting right.
That can often be repaired without replacing the whole fence.
The main thing is checking what actually failed.
If the post is solid and the sheet is damaged, the repair may be simple. If the post has moved or the bottom rail is twisted, the job changes.
Timber fences usually fail slowly.
A paling goes. Then a rail. Then a post softens. Then the fence starts leaning.
Perth weather doesn’t help. Winter rain, summer heat, retic spray, termites, garden beds and age all take their turn.
Common timber fence repairs include replacing palings, repairing rails, securing loose sections, fixing small gate issues, and replacing failed posts where practical.
The main thing with timber is honesty.
If the fence is mostly sound, repair makes sense.
If every second post is rotten and the rails are falling apart, patching one section may be a waste of money.
We’ll tell you before it turns into one repair after another.
Some Perth properties have brick piers, brick boundary sections, or fencing fixed between brickwork.
These jobs need a bit more care.
A loose panel connected to brick is different from a timber fence bay. A gate hung from a brick pier is different from a gate hung from a timber post.
The repair depends on what has moved.
Sometimes it’s the fence section.
Sometimes it’s the fixing.
Sometimes it’s the gate hardware.
Sometimes the brickwork needs a different trade before the fence repair makes sense.
We’ll keep the repair practical and point out anything that sits outside normal fence repair scope.
Not every broken fence needs replacing.
That’s the first thing.
A repair usually makes sense when:
The damage is local
The posts are still solid
Only one or two panels are affected
The gate hardware has failed but the frame is fine
A small section has moved after wind
The fence is mostly straight and stable
Replacement starts making more sense when:
Multiple posts have failed
The fence is badly leaning across a long section
Timber is rotten through several areas
Colorbond panels and rails are badly damaged
The same fence keeps failing after repairs
The fence is unsafe or not worth patching
We don’t push replacement where a repair will hold.
But we also won’t pretend a tired fence is fine just to win a small job.
If the fence can be repaired properly, we’ll repair it.
If it needs more than that, we’ll say so.
Fence repairs are common in rentals.
A tenant reports a gate that won’t close. A neighbour complains about a leaning fence. A storm damages a panel. A routine inspection picks up loose palings, rusted fixings or a broken latch.
PMPWA handles fence repair jobs for landlords and property managers across Perth.
We can provide clear job notes, photos where practical, and straightforward invoicing so the property manager or owner can see what was done.
Good fence maintenance matters because small issues can become disputes quickly.
A broken latch today can become a security complaint tomorrow.
A leaning fence today can become a boundary issue after the next storm.
Strata and commercial properties usually need fence repairs handled cleanly.
No drama. No messy communication. No tenant or owner chasing for updates.
Common jobs include common-area fencing, side access gates, bin-store fencing, boundary sections, small security fencing issues and general fence damage.
If your fence is leaning, damaged, loose, rattling, rusting, storm-damaged or not closing properly, send through a photo and the property address.
We’ll tell you whether it looks like a repair job or something bigger.
Yes. PMPWA can repair common Colorbond fence issues like loose sheets, damaged panels, rusted screws, bent rails, shifted posts, gate problems and storm damage, subject to the condition of the fence.
Yes. PMPWA handles timber fence repairs including broken palings, loose rails, rotten posts, leaning sections, missing boards and gate issues.
If the damage is local and the posts are still solid, repair usually makes sense. If the fence is leaning across a long run, rotten through multiple sections, or keeps failing, replacement may be the better option.
Often, yes. It depends why it’s leaning. If the issue is one or two posts, repair may be possible. If the whole fence line has moved, it may need bigger work.
Yes. PMPWA repairs sagging gates, latch problems, hinge issues, dragging gates, alignment problems and small access issues where they sit within normal fence repair scope.
Yes. Storm-damaged fences are common in Perth, especially where posts or fixings were already weak. PMPWA can repair loose panels, damaged sections, gates and unsafe areas.
Yes. PMPWA handles fence repairs for landlords, property managers, strata managers and agencies across Perth.
